383 Stroker

9

93missl96

Forum Member
I have a bit of an issue, hopefully someone here can help me out.

Im running a 383 in my Caprice Wagon, Vortec heads, Profesional Products Hurricane Intake, and a 770cfm Holley carb from a 67-69 Camaro. The problem is, i am running 2 PCV Valves, but i need to have somewhere to hook up the vacuum for power brakes. The carb only has one big vacuum fitting. Can i drill and tap the intake for the PCV valves?
 
yes you could. or just get a T-fitting off your port on the carb, or run a spacer under your carb that has fitting in it( or make your own, rather than drilling your intake).

No need for two PCV's. Just Run one, and a breather. Or ditch the pcv and just use 2 breathers
 
You must log in or register to reply here.
Back
Top