351W Victor Jr. Fuel Inj Intake & Vic Jr. 351W Carb intake & Canfield Heads

[thunderace31]

2- Canfield Heads P/N on heads is 40-450-65-1
1.60 Ext Valves 2.08 Intake Stainless Valves
I had these flo tested years ago and Dont have the papers any more but they were 310 int. 200 ext and they are set up with new .640 Lift Hyd. Roller Cam Springs with 7/16 ARP Studs and guide plates I was only running a .570 Lift cam with them and they have less than 3000 Miles on them since being redon

Looking for $1000 and Im pretty Firm on them as you cant buy them any more and these are in really nice shape other than needing a good cleaning.

Call any time before 9PM 313-850-three two one two Thanks

 

[INJCTED]

what fuel rails do you use on the Efi intake?

 

[thunderace31]

what fuel rails do you use on the Efi intake?

Did not come to me with any thing but the intake no rails no Inj. No regulator what you see in the photo is what I have.
I purchased an engine that was run fuel inj. and Im going Carb with a Super Vic. intake hence the sale of the ones I do not need.

Hope this helps and thanks

 

[INJCTED]

Ok I'll look into it at edlebrocks website! I'll let you know

 

[thunderace31]

Ok I'll look into it at edlebrocks website! I'll let you know

From what I was told you can use any inj. and any Rails the Aeromotive work well with them as to several others I think BBK is what the guy had on it with a Wilson Elbow and 90MM TB.
All the stuff is available I was going to use one of the Acufab TB and Areo rails then went blow threw instead hence the sale of it.

Hope this helps and thanks

 

[thunderace31]

Apparently there is a lot of Miss info on the Canfield heads they are a Raised port head but the port is raised on the inside of the head and the Port is in the stock location on the outside of the head.

They use FACTORY STYLE HEADERS no need for custom headers with these.

Just an FYI as I have had all kinds of questions pertaining to what headers are needed for them. Answer STOCK or any aftermarket headers for stock bolt pattern/Location heads
Hope this helps and make an offer need them out of my Garage
thanks

 

[thunderace31]

Here is a Photo of the Rails on the Intake I was just told By Edelbrock they never made a Vic Jr. EFI Intake this one was custom made so you cant get another one like this

 

[thunderace31]

FI Intake is sold
Last Chance for heads before I just put them on egay. Dont want have to ship but will at buyers expense
thanks

 

[TimBoSlice]

What size intake runners are the heads?

 

[thunderace31]

They were 190cc they are now 220CC after Porting

 

[thunderace31]

$1000 OBO On the heads come get them before egay listing happens

 

[thunderace31]

Do I hear $975 ????

 

[thunderace31]

No one needs some nice heads ?

 

[thunderace31]

TTT

 

[thunderace31]

NEW MOTOWN ONLY PRICE $900 Cash you pick up $100 Cheaper than Craigslist

 

[thunderace31]

TTT Call me need these gone asap new Stuff is on its way

 

[thunderace31]

All PM's replied to thanks

 

[thunderace31]

sold pending payment