E4AE 351W block, 1 piece rear main seal, burned and blasted, block looks better than new. Rough bored for .040" final hone, clearanced for stroker
351W crank, 60,000 miles, no burned or spun bearings (needs to be polished or ground and polished)
351W rods spot faced rod bolt holes, stock pistons are still on them.
Comp Cams 244/244 @.050" small base circle hydraulic roller cam (works in this block with stock roller hardware).
I planned to build this 351 but wound up going another route. Nice start to a shortblock. $650
351W crank, 60,000 miles, no burned or spun bearings (needs to be polished or ground and polished)
351W rods spot faced rod bolt holes, stock pistons are still on them.
Comp Cams 244/244 @.050" small base circle hydraulic roller cam (works in this block with stock roller hardware).
I planned to build this 351 but wound up going another route. Nice start to a shortblock. $650
Last edited: