3 shortblocks with new machining

J

jzake_01

Forum Member
i just recently purchased 3 blocks and have the parts to make them into short blocks if someone wants them, i will be doing the work this week and next so if someone wants somethign tell me so i can do it first..

i have an 86 302 roller block
i plan to deck the block .010 over
bore and line hone the cylinders to .030 over
i can also install cam and main bearings along with freeze plugs etc if the person who buys it wants me too...
i also have stock rods crank and pistons to complete a short block


i also have an 87 and up 302 roller block
will be getting decked and honed like above..
also have crank with stock rods and forged pistons.
will install cam /main plugs if wanted


i also have a 79 351w block.
will be decking .010 under and line honing/boring 30 over
will be assembling short block with stock crank(most likely .010 unndersized journals) and stock rods with keithblack pistons.


just wondering if anyone wants a decent shortblock that will be freshly machined and also if someone just wants the blocks after machining i could sell them to without the internals for a cheaper price

thanks
jake
 
i actully live in canada
i go to school for automotive and we doo all of thsi stuff in class
i just got doen 2 chevy 350s with 4 bolt mains for a race application

i had these blocks so i thougth i would machine them and seel them

i shouldnt have a problem doing the 87 with clearance for a 347 if you want
im gonna assume you dont want the stock stuff i have, do you want it assembled with cam bearing and freeze plugs etc... pm me with what you want and we can talk prices.
thanks guys and bump to the top
 
okay so yuou want it 30 over and clearance for a 347...
do you want it decked 0.010 or just enough to square both sides(probably be like 0.001 or 0.002)
Anythign else before i through out a price?
 
You must log in or register to reply here.
Back
Top