r6rider2002
Forum Member
No longer for sale
Last edited:
2004 Chevy Silverado Regency RST repairable
- Thread starter r6rider2002
- Start date
r6rider2002
Forum Member
This was the truck before the accident I can't get any other pictures uploaded I don't know why
Last edited:
twotwoturbo
Club Member
nice truck. you looking for cash only jay?
Do you have photos of it as it sits now? If so email them to [email protected]
I can also upload them here if you'd like me to.
I can also upload them here if you'd like me to.
dave89iroc
Club Member
current pics please
r6rider2002
Forum Member
I can't post any current pics on here I don't know why I have to text or email them
Detroit Gearbox
Forum Member
go to a host, such a tinypic.com and load them there..... then cut and paste the link
r6rider2002
Forum Member
Frame is 100% untouched it was a high hit destroyed the hood fender and top part of the core support
WhiteHawk
Club Member
All the structure behind it thought will need to replaced and welded in....
Did someone from here snag it?
dave89iroc
Club Member
WhiteHawk
Club Member
If the frame was OK like he said, then literally, the fenders and rad support are the strucure on Silverados. Everything forward of the CAB bolts on. There is no body in white like unibody cars. Everything is just bolted to the frame and each other. That would have been a steal to repair if the frame was really untouched.
-Geoff
So is it sold or no longer for sale now?
4Gas$
Club Member
Since r6rider2002's truck is no longer available, here is
something kinda near it...
http://annarbor.craigslist.org/cto/5979756850.html
This posting is for a 1989 Chevy C1500 with Silverado trim
It's a short bed pickup and it's 2WD (getting hard to find)
HAD a 4.3 v6 which has been replaced with a rebuit 5.7/350
5 speed manual transmission
Recently replaced the clutch master cylinder and slave cylinder
Ice cold A/C and great heat
Red and Burgundy cloth interior
Brand new headliner
Tinted rear window
Fiberglass roll pan
Kenwood am/fm cd player with USB input for an IPOD
Aftermarket wheels
Newer tires with around 3,000 miles and almost no wear (tires have an 80,000 mile warranty)
True duals with flow through cats (has small leak below cab/easy fix)
Has Flowmaster super 44's
Newer u-joints/ball joints/wheel cylinders/belt/plug wires/front end bushings
New ignition cap and rotor
Newer shocks
New radiator
New battery
New alternator
New TPS sensor
New front pads and rotors with less than 300 miles on them. Repacked the wheel bearings as well.
I have the rear brakes but have yet to install them
Rebuilt the tilt steering column a few months back to eliminate the notorious "wobble"
Refurbished instrument cluster that displays the original miles
Milage is as follows:
Engine-68,000
Trans-32,000
Clutch-15,000
The body and rear end have around 197,000
The truck does need cab mounts repaired
Needs both cab corners and rocker panels replaced (have the new sheet metal replacements/will include)
The drivers side wheel well on the bed has minimal but normal rust
Clear coat is about 50% gone from the roof down to the body line
I do have a fiberglass running board/fender flare kit that I will include
I had big plans for this truck.. The only reason why I am selling it is because I have too many vehicles.
Not to mention it'll be at least a year before I have the time to blow it apart and start any kind of cosmetic restoration
*Tinted rear window is not shown in the picture*
*Soft tonneau cover is not included*
Asking $2,300 or best reasonable cash offer
No trades will be considered
Please email for more info and please inquire with specific questions.
something kinda near it...
http://annarbor.craigslist.org/cto/5979756850.html
This posting is for a 1989 Chevy C1500 with Silverado trim
It's a short bed pickup and it's 2WD (getting hard to find)
HAD a 4.3 v6 which has been replaced with a rebuit 5.7/350
5 speed manual transmission
Recently replaced the clutch master cylinder and slave cylinder
Ice cold A/C and great heat
Red and Burgundy cloth interior
Brand new headliner
Tinted rear window
Fiberglass roll pan
Kenwood am/fm cd player with USB input for an IPOD
Aftermarket wheels
Newer tires with around 3,000 miles and almost no wear (tires have an 80,000 mile warranty)
True duals with flow through cats (has small leak below cab/easy fix)
Has Flowmaster super 44's
Newer u-joints/ball joints/wheel cylinders/belt/plug wires/front end bushings
New ignition cap and rotor
Newer shocks
New radiator
New battery
New alternator
New TPS sensor
New front pads and rotors with less than 300 miles on them. Repacked the wheel bearings as well.
I have the rear brakes but have yet to install them
Rebuilt the tilt steering column a few months back to eliminate the notorious "wobble"
Refurbished instrument cluster that displays the original miles
Milage is as follows:
Engine-68,000
Trans-32,000
Clutch-15,000
The body and rear end have around 197,000
The truck does need cab mounts repaired
Needs both cab corners and rocker panels replaced (have the new sheet metal replacements/will include)
The drivers side wheel well on the bed has minimal but normal rust
Clear coat is about 50% gone from the roof down to the body line
I do have a fiberglass running board/fender flare kit that I will include
I had big plans for this truck.. The only reason why I am selling it is because I have too many vehicles.
Not to mention it'll be at least a year before I have the time to blow it apart and start any kind of cosmetic restoration
*Tinted rear window is not shown in the picture*
*Soft tonneau cover is not included*
Asking $2,300 or best reasonable cash offer
No trades will be considered
Please email for more info and please inquire with specific questions.
ultradriver10000
Forum Member
so what did it sell for?