2003 Silverado Z71 cam, stall, 14 bolt, etc

RSpencer

Forum Member
Selling my 2003 Chevrolet Silverado 1500 Z71, extended cab, short box, black. Truck runs and drives very nice. Has a 2005 5.3 engine with a 212/218 Comp Cams camshaft, LS7 lifters, hardened pushrods, rocker arm bearing upgrade. Heads were resurfaced and a valve job was performed. All new gaskets throughout the engine were installed. ~7,000 miles since the install of these items. Also has stainless long tube headers, 3 inch y pipe, and a 3.5" Duramax exhaust. The pcm was retuned for these modifications. Has an automatic transmission which was rebuilt ~20k miles ago. 3000 stall Circle D torque converter was installed at the time of the engine modifications and a large B&M transmission cooler with fabricated steel lines was added to keep transmission temperatures down. Has a 9.5" 14 bolt rear axle with 4.56 gears and a Detroit True Trac center section. Front axle was recently rebuilt with Motive 4.56s and all new bearings and seals. Other misc repairs done to the truck recently are: front/rear brake pads/rotors, front wheel bearing, truck has been leveled and an alignment followed, Toyo Open Country 285/70/17 tires 8,000 miles ago, driver seat has a new foam bottom and cover and the passenger seat has been recovered also, A/C compressor, Rancho shocks, tailgate hinges, Truxedo tonneau cover, etc, etc etc. . .. . .have receipts for almost everything. Also has electronic trailer brake controller. Truck has been great to me but I am looking at newer vehicles. Pulls a trailer great and has enough power to have some fun with it. Asking $10,500 or best.

65c66b229ad439635d9e2a1c8d9ad119.jpg


2b553810eae4794cb4093bdb17508b48.jpg


83383346a65b6f052a8e3cbf2b9c50bd.jpg
 
Last edited:
212k on the truck. I had the cab corners replaced last November. Previous owner put outer rockers on it. Looks pretty good. I put chassis saver on the inside lip of the doors. They are good minus a couple scratches at the bottom.
 
Back
Top