Originally a Kentucky car. The car was stripped bare to verify condition. I planned to build it into a street/strip car. All the sound deadening has been removed. There is a 4 point cage tacked in it that needs to be welded in or is easily removable as well. I have extra steel bars to make it a 6 point or more. I was in the process of installing battle boxes. The right side is almost complete, the left side still needs to be installed. It needs a little metal work on the cowl panel (original hood apparently came up, I planned on plating off the cowl area) and the right rear quarter but there is no rust on the car other than a couple real small areas on the floor. The floors, quarter panels, doors, frame rails, fenders, deck lid and trunk area are all very solid. The glass is all good, the front fascia is a little rough but easy work for someone familiar with it. I have both a stock front suspension set-up as well as a tubular k-member set-up depending on the buyers wants. I also have an 8.8” with a gear and a posi in it that could go with the car. It has a 6” fiberglass pin on cowl hood. $2200 with the tubular front end parts and the 8.8”. $1500 without it. This is a real solid start to a nice car… I have too many projects and not enough time so something has to go, unfortunately it’s my project car. I do have engine options if interested.
Last edited:
