StealthRTSC
Forum Member
I am looking to sell my 1984 Corvette Street/strip car. Owned it for a few years. time to move onto something different.
Specs:
1984 Corvette (80K miles)
Motor:
355Ci SBC
World product Sportman II heads
1.6 Scorpion Rockers
Super Victor Intake
Proform 850 CFM carb
Billet Pulleys
Billet Alt. Relocation bracket
Holley Blue fuel pump
QFT regulator
Intake mounted Regutalor and Gauge
600 Lift cam ( Unsure of total specs)
Transmission:
Th350 Transmission
Coan 5500 Stall
CCI Drive shaft
Exhaust:
Bullet Mufflers (Ceramic Coated)
Mandrel Bent 3" pipe
Hooker long tube headers
Car specs:
Roll Cage
Autometer gauges (water temp and Oil PSI- need to be hooked up to motor)
5" tach (Proform)
Matte black paint ( Not perfect but decent)
6" Cowl hood
Stainless Steel sheet metal wing
Weld Prostar Wheels (ET streets 11.5X28 on back/Skinneys in front)
Lower'd W/ Prothane bushings
It needs a new shifter, Believe its the problem. On woodward Idrove car on trailer, when i unloaded it it wouldnt go into gear. Didn't look far into it.
This motor and trans set up in a S10 went 11.8's @118MPH with alot left in it. motor is 11:1 CR. Perfect nitrous motor.
Come hear it run etc.
Asking 4500$ OBO
(586)744-0114 (prefur txt)
http://detroit.craigslist.org/mcb/cto/2973412000.html
Specs:
1984 Corvette (80K miles)
Motor:
355Ci SBC
World product Sportman II heads
1.6 Scorpion Rockers
Super Victor Intake
Proform 850 CFM carb
Billet Pulleys
Billet Alt. Relocation bracket
Holley Blue fuel pump
QFT regulator
Intake mounted Regutalor and Gauge
600 Lift cam ( Unsure of total specs)
Transmission:
Th350 Transmission
Coan 5500 Stall
CCI Drive shaft
Exhaust:
Bullet Mufflers (Ceramic Coated)
Mandrel Bent 3" pipe
Hooker long tube headers
Car specs:
Roll Cage
Autometer gauges (water temp and Oil PSI- need to be hooked up to motor)
5" tach (Proform)
Matte black paint ( Not perfect but decent)
6" Cowl hood
Stainless Steel sheet metal wing
Weld Prostar Wheels (ET streets 11.5X28 on back/Skinneys in front)
Lower'd W/ Prothane bushings
It needs a new shifter, Believe its the problem. On woodward Idrove car on trailer, when i unloaded it it wouldnt go into gear. Didn't look far into it.
This motor and trans set up in a S10 went 11.8's @118MPH with alot left in it. motor is 11:1 CR. Perfect nitrous motor.
Come hear it run etc.
Asking 4500$ OBO
(586)744-0114 (prefur txt)
http://detroit.craigslist.org/mcb/cto/2973412000.html
