15x10 4 inch BS w/ 8.8?

1quickguido

1quickguido

Forum Member
Has anyone ran this backspace on a sn95? If so, would anyone know the wheel to wheel measurment, I am narrowing the rear in it now, i could wait for the rims to get here to get the measurement but i would like to know if anyone has done it and if you have pics of a 15x10 4 inch bs on a mustang, thanks.
 
My rear end is shortened 2" on each side and I ordered a 15x10 5.25BS I don't have them yet to take pictures tho, I believe my math was right so I guess Ill find out in a few weeks lol
 
You are obviously doing a mini-tub rt? I run a 6.5" back spacing on mine and with a 28x 10.50. They are really close on the inside
 
Why narrow it for a 15x10? you can fit a 325 tire on an sn95 with no trouble at all. unless your mini tubbing it to run a monster tire there isnt much point to narrow it unless you just want a big deep dish look. Mine was shortened 3/4 of an inch and i was running a 15x10 with 6" back spacing. with a 325 mickey thompson drag radial. which kind of matches cravens numbers because normal backspacing for a 15x10 is 6.5"s
 
All I did was narrow it to get a 3.5 bs wheel. It's all finished now ill figure out how to put pics on here, it was on the Detroit race scene main page couple days ago
 
87droptop said:
You are obviously doing a mini-tub rt? I run a 6.5" back spacing on mine and with a 28x 10.50. They are really close on the inside
Click to expand...

I wasn't planing on it Lol, I figured to have it shortened a few inches to help save on some weight and what not. It's bascules the same size as a fox rear end now
 
MentalMisfit said:
Why narrow it for a 15x10? you can fit a 325 tire on an sn95 with no trouble at all. unless your mini tubbing it to run a monster tire there isnt much point to narrow it unless you just want a big deep dish look. Mine was shortened 3/4 of an inch and i was running a 15x10 with 6" back spacing. with a 325 mickey thompson drag radial. which kind of matches cravens numbers because normal backspacing for a 15x10 is 6.5"s
Click to expand...

It was my frist time trying to figure out back spacing. I do want a big deep dish look. I don't have my wheels yet but was using a 15x10 bogart RT wheel and that has a 6.5 bs. When I put the wheel where it needed to be in the center of the the opening and had a 1.25 inch gap from the back of the wheel to the axle flang so I took 6.5-1.25=5.25 back spacing to work. Hope it turns out right cuz of the price of the rear rims costed me lol they where exspincive as hell lol
 
Cravens99 said:
It was my frist time trying to figure out back spacing. I do want a big deep dish look. I don't have my wheels yet but was using a 15x10 bogart RT wheel and that has a 6.5 bs. When I put the wheel where it needed to be in the center of the the opening and had a 1.25 inch gap from the back of the wheel to the axle flang so I took 6.5-1.25=5.25 back spacing to work. Hope it turns out right cuz of the price of the rear rims costed me lol they where exspincive as hell lol
Click to expand...
We'll my math worked out it fits nice
 
Last edited:
You must log in or register to reply here.
Back
Top