Recent content by wrath

So, I've been waiting to buy a motorhome and a Jeep Wrangler since just before the pandemic. I almost bought both, but then the pandemic happened. I convinced my parents to buy both just before (closed on the motorhome March 2020... took a while to get it). My parents got good deals, you guys...

Long shot... but... Tired of the slop in my YJ's AX5. Syncros are fine, shifts fine, but sometimes I end up in 4th instead of 2nd. Time to go to an AX15. Would prefer a 90-99 AX15 from a 4.0L Wrangler. YJ or TJ doesn't matter. The differences between them and the years I can deal with...

I'm looking for some tires/wheels and noticed that there are a lot of takeoffs out there. Seems like some are overpriced and some are a solid deal. Facespace Marketfarce is a PITA to weed through the scammers on. Mostly looking for Jeep Wrangler takeoffs with BFG ATs, 285/70r17. Pretty much...

I'm looking for four BCI Group GC8 (8v) golf cart batteries. I have two from Blain's Farm and Fleet. They are made by whoever makes the Trojan-style T875 which look just like the Crown CR-150 batteries. GC8 batteries of decent quality seem to be in short supply on the east side of the state...

I'm looking to buy a new chainsaw. They're pretty much all fixed price. I have a MS362CM on order at a few places but the earliest estimated delivery is Weingartz in October. I'd consider a MS462CM. Weingartz has a MS500i on the shelf I'm considering.

I procured a pontoon boat against my better judgment. Been wanting one for the pond because I'm sick of cleaning the paddle boats, row boat, kayaks etc. The boss said she liked it so much she wants it to go out on nearby lakes when not wanting to take out the jetboat. It's ugly, slow (9.8hp...

$100 or trade me something useful?

Cadillac 472/500/whatever heads. 1602493 is the casting number which was what was used on all of the 75-76 motors. 120cc chambers. $100 or trade me something useful?

Anybody know of an appliance repair parts place that stocks parts that will deal with the public? I'm looking for a Whirlpool #W10779716 or equivalent that fits a WFE540H0AS0 range. I ordered one from the Internet but I'd rather pick up a replacement tomorrow.

RV steps - sold Sold

I'm looking to get a new Miller Dynasty 280 DX CC/CV and probably a Coolmate3 or Coolmate4 fairly soon. I bought my Multimatic 215 and my Millermatic 252/Alumapro from Baker's but they didn't impress me much so I haven't set foot in a store since I bought my last couple welders a little less...

I'm looking for a cooler. Would prefer a Coolmate 3 or preferably Coolmate 4. Most of the used ones I've found are over a decade old and within a hundred bucks of new. I'm also looking for a wire feeder. I would prefer a modern ArcReach 8VS or 12VS but I might consider a modern benchtop wire...

I'm looking for an alignment shop that will do an alignment without lifting the vehicle, or one that will settle the vehicle on the lift. The suspension needs to be fully settled to ride height in order to get a good alignment due to poor suspension Geometry of a 1970s FWD car (Suspension is...

Decided I don't need two spares. This one is for RWD 472/500 cars. $100 or trade me something useful.

#2, #4, #6, and #8 pistons (driver's side) are broken on a fairly freshly built Cadillac 500. Like 700 miles and 8 hours. Other side of the motor looks like brand new. Like only 3% leakdown with cold cylinders. It pretty much always had blowby (enough where the PCV valve couldn't keep up...