Recent content by Rebel Racing

Hi Guys, Looking to get rid of our rubber rad hoses and go with braided AN hoses and fittings. Wondering what size (-numbers) I need to order for the hose and fittings to duplicate the size I currently I have on our sb Ford motor. Thanks!!

Recently we picked up a 1968 Mustang Convertible with a 302 (carb'd) and an AOD. This is a shared summer cruiser for my Wife and myself. Later this month we are installing a set of TFS heads,Weiand Stealth intake, a roler cam, a 2500 rpm converter and shortie headers--all parts purchased and...

Hi Guys, Getting serious about a late 60's Mustang for sale from a private guy. I don't suspect anything but, would like someway to run the VIN to make sure it's not stolen. CARFAX is no help since they need a 17 digit VIN and that didn't come to be until 1981. Any way to check this...

Hi Guys, The Wife says she would like a fun summer driver and wants an older Mustang convertible. We're going to be looking for: 1965-1968 V8 convertible Interior/Paint not important as we can do that ourselves MUST be solid underbody--previously repaired is fine, but not interested in a...

Hi Guys, Currently have a GZM Motorsports Evac pump on the Dart 306 motor. We make 750 at the tires with 25 lb of boost. When we put together this motor I installed the pump--we never ran it with just a couple of breathers. Over the off season I installed a different crank pulley for the blower...

Hi guys, Finishing up a remote water pump install and have found out that I will need to go to a remote oil filter kit. Not a big deal at this point as it will free up some space in the area of the filter. I found a kit by Trans Dapt for about $50 at Jegs--so far so good. I go to the makers...

Hi Guys, Wondering what is the radial tire match is for a 28x10.5x15 ET Drag (which is equal to a 28x12.5x15 ET Street). I am buying a set of ET Street Radials and thought that the match would be a 275-60-15 but wonder if a 295-55-15 is closer. My current 28x12.5x15 ET Streets are on a 10" rim...

Hi Guys, Getting redy to order fittings for our remote WP. I will have (2) -12 lines coming into the motor ( dual outlet Meziere pump). Should those hose ends be 45' or is are 90's O.K. ?? I maybe tight on space with a 45' end so a 90' would fit better but I don't want to compromise flow. What...

Hi Guys, Getting redy to order fittings for our remote WP. I will have (2) -12 lines coming into the motor ( dual outlet Meziere pump). Should those hose ends be 45' or is are 90's O.K. ?? I maybe tight on space with a 45' end so a 90' would fit better but I don't want to compromise flow. What...

Hi Guys, Upgrading to a 90mm throttlebody and have a question.........I can get a new Holley 95mm unit for $150 (private guy that needs the $$) OR a new 90mm Accufab for $280 (retailer). I'm going from a 75mm Accufab so I know their quality. It is a blower car making 24 lb of boost and...

Hi Guys, For the last several months there has been some corrison on some of the spark plugs--we change them every other race. Last week when I set the valve lash I pulled the plugs and as I was bumping it over a very fine mist of water was shooting out of the plug holes on cylinders 1 thru 4...

Hi guys, Got a Holley Systemax 5.0 intake(upper and lower) that was on a well known Renegade car. Heavily ported by TEA in KY. Might be selling it next month..........what's it worth?? Thanks!!

Hi Guys, Looking for advice to solve an on-going problem I have with spinning off the line. The car is our True Street Fox body car. Weighs 3220 lb race weight and is putting down 740 to the tires. Best ET to date is a 9.10@152 with a lousy 1.47 short time. The best 60' it ever did was a 1.42...

Hi Guys, Looking for ideas to do for the Wife next week for our anniversary. Something within a couple hour drive of Detroit and likely an overnight stay. Did the Henery Ford thing a few yrs ago--she like the car stuff so she is open to any ideas. Suggestions?????

Hi Guys, Ordered a new 50MM cog belt and found out that the distributor substituted the usual Gates PowerGrip HTD14408M50K for a Goodyear Hawk PD in the same size. They tell me that it is just as good.....anyone ever run this belt?? I'm curious to see how it holds up compared to the Gates---any...