Recent content by mymizzery

Hey all. Looking for some help here. I am working on an 87 mustang V8 swap. Car is all together. Only thing left to do is connect all the wiring harnesses , vacuum lines , battery cables/ground wires. I do not have a car to be able to go off of I was wondering if there was anybody in the Detroit...

Hey all. Looking for some help here. I am working on an 87 mustang V8 swap. Car is all together. Only thing left to do is connect all the wiring harnesses , vacuum lines , battery cables/ground wires. I do not have a car to be able to go off of I was wondering if there was anybody in the Detroit...

I live in Warren, got a warning from the City of Warren code enforcement dept. about my jeep not having current plates, the jeep is backed into my driveway. it is complete without any parts missing and the only way that you would be able to see that its not registered is if you walk up my...

I am running new fuel lines in my 87 4cyl to 302 swap project on a very tight budget. I am replacing the return rubber hose from the sending unit to the steel line. I was looking around for 1/4" fuel injection hose went to 4 different places and everyone was out. so I found 1/4" fuel hose...

So I took my console and dashboard apart a few years ago thinking i could finish what I wanted to quickly but 8 years later after life happened. I am now just finishing up the dash and console. the only thing I cannot figure out is how these little tabs get connected, and what the purpose of...

just as the title says I'm doing an AOD to t5 swap, need wiring harness for an 87 hatch. trans is from an 89 not sure if that matters or not.

i am converting from a 4 cyl to a v8, and I need to move the fuel lines from the drivers side to the pass side. the easiest way to do it would be to cut the fuel lines just before they cross over in the transmission hump, flare them and route them along the pass sub frame. upon looking at the...

87 hatchback. As I am piecing together my dashboard I found that I do not have the small light cluster that includes low fuel light. the cluster sits behind the window on the lower right corner of the instrument cluster bezel as shown in the pic below . I have done some exhuasting searches for...

I am splicing fuel hoses from V8 to a 4 cyl fox. are brake line flaring and fittings safe to use on steel fuel lines? or is there a different type of fitting I need to use?

I am looking for any websites that list cars for sale that need work, I am mainly looking for mustangs, but will consider other makes and models. I know there are sites out there. just not sure what are the better ones.

I could use some help here, I am converting an 87 mustang from a 4 cyl to 8 cyl, when the old motor was removed the Fuel hoses that connect the steel fuel lines to the fuel rail were cut. now that I am about to put the motor in the car I am having trouble finding replacement hoses. I prefer...

i need the feed and return hoses that connect the fuel lines to the fuel rail for a fox body 5.0 Not sure if they are year specific but its going in an 87 Hatchback

I'm looking for an Engine wiring harness from an 89 to early 92 mustang I have an ECU from an 89 5.0 manual. It's going into an 87 LX. which I believe the fuel pump relay is under the drivers seat.

My Fiance' wants to make some type of yard art with four tires that she has. The problem is that the tires are still on the rims, and she asked a couple of shops in her area (West Bloomfield/Waterford) and they told her $15 dollars a tire just to take them off the wheels. which is a Major Rip...

I'm looking for a Block plate for a 87-93 5.0/T5 WC trans. also looking for an all steel bearing retainer for T5 WC trans.