Recent content by fastford

Roller block bored and torque plate honed .040” over, square decked, clearanced for a stroker even though it doesn’t currently have a stroker in it, ARP main studs, new cam bearings and freeze plugs, polished 302 crank (50 inoz), SRP forged flat top pistons, Sealed Power rings (file fit for...

351W 1969 block .030" over torque plate honed Square decked New cam bearings and freeze plugs Stock crank cleaned and polished Scat I beam rods with bushed pin ends Clevite 77 main and rod bearings DSS forged flat top pistons - full floating Sealed Power rings Cast iron 157 tooth flywheel...

I'm looking for a pair of 4 lug Weld drag lites for a Fox body Mustang. Rear wheels. I have a pair of skinny fronts but I need a pair of regular ones for the rear. 15x8. The rear wheels I have are drilled for slicks so I can keep them for the track but I'd like to find a pair for the street.

Our son had his Jeep stolen Saturday night so we are looking for another vehicle to replace it. He needs reliable transportation for work and school. Let me know if you know of anything we could look at. $5K budget. Preferably a Jeep but we'd consider anything 4wd.

Part number 301200 FAST XFI fuel injector harness new in the box. Standard firing order for SBC, BBC and all Chrysler. $100

Monroe-Matic Plus 32252 shocks for stock ride height Jeep Cherokee. Bought new and installed, then realized the Jeep we were working on was raised so these won’t work for us. Paid $100 for the pair. Sell for $75.

Built this for my Mustang but decided to go with a bigger setup. 302 roller block ARP main studs DSS forged flat top pistons (4.030" bore) Scat I beam rods TFS Stage 1 cam Double roller timing set GT40 heads (cast iron) ARP 12 point head bolts Edelbrock reverse rotation water pump Edelbrock...

I'm looking for an older timing light. Maybe Craftsman or other brand. My timing light has a dial retard on it and when I use it to set timing on my MSD6 system (and a locked distributor) it shows the timing retarding 4-6 degrees as the RPM goes up. I read that this issue can happen so I...

I have (3) working 8 foot florescent lights (with bulbs) I'm taking down. If anyone can use them they are free. No longer available. Gone 4/21/2021

410 cubic inch smallblock. 1974 351W block, ARP main studs, clearanced for stroker, square decked, align bored, Scat 4” stroke cast steel crank, 6.2” h-beam rods, .040” over Diamond forged dish pistons (10.6:1cr), Hastings rings file fit for nitrous, Comp Cams solid roller cam (236/[email protected]"...

This is a fully machined block. I got the engine assembled and found the block has some porosity in the casting about an inch or so down from the head deck (water jacket to the outside). The engine was never fired up. I found this while doing cooling system vacuum/pressure tests. Minor leak...

Looking for a cast iron 6.0L LS block. The one we were going to build with is cracked across the head deck. Let me know if you have anything available.

These parts came with a project my buddy picked up. Front tubular lower control arms with no spring mounts (coilover only). They are supposed to be QA-1 but I can’t find any part numbers on them. Measure 14-1/4” (approx) from A-arm pivot center to ball joint center. Includes castle nuts...

I'm looking to put a stock 302 HO engine back together as a complete engine and it's missing some misc pieces. . Anyone have some stock valvetrain parts (valves, springs, retainers and keepers) laying around they want to unload? And a stock damper and oil pan/pickup tube? The pan I have has...

I have an Edelbrock Performer 289/302 SBF intake. There is a damaged temp port hole. Someone tried to extract the plug and jacked it up. Not worth my time to try to repair it but I figured I'd offer it here for free before I scrap it. Other than that the intake is in decent shape.