Recent content by abasi1

Looking for a cowl vent for a Fox body. If you have the Piece below the window that covers the cowl give me a buzz @ 313 662-4949, ask for Josh, thanks!

91 LX Convertible 5.0 with world class 5 speed. It s been a very tough decision to sell, but moving out of state so I must sell my prized possession. Paint is original and can be touched up along with the black rubber bump guards around entire car, over all this Mustang is SOLID! The Mustang has...

I'm selling 2 aluma Star front runners and I need 2 17in cobra rims to replace them with, if you have them and they're chrome give me a buzz and I would like to take a look at them, thanks! Josh..

I have a set of Weld Aluma Star front runners that are 5 lug with tires that are in excellent condition on the car for sale $400 and I need two Cobra wheels to replace them with. $500 with out the Cobra wheels to replace the front runners on the car. The wheels are on a 91 Mustang right now...

The inlet needs to be offset 2 1/4( to the left if look from the rear) and outlet needs to be centered. If you have em feel free to buzz me anytime, 313 662-4949,ask for Josh, thanks!

These rims are off of my "09" GT G8. I selling them to buy different wheels. The set is $1700 (tires and rims) to purchase new, the first $700 takes them! Call me @ 313 662-4949, anytime-if your serious..

I have one set of Weld Aluma-Star front runners for sale that are 4x15 inch 5 hole rims that are one piece polished aluminum (very light and strong) They have less than 200 miles on them and are in very good condition. Will post picture asap or go to Summit#788-15202 and you can veiw them there...

I have a 91 convertible Mustang with a stock short block, cam @50 has 500 in lift w 112 speration, heads are simular to AFR 185 that flow 265 on the int and 185 ext @28 in, Cobra upper and lower intake with a 1 in spacer, inbetween while being forcefed @ 11lbs. MSD, 3/4 full lenghth headers...

I have a 91 5.0 Mustang convertible and when ever I hit bumps in the road the doors jump up and down as if they're not closed properly. The frame is tied and the body is in very good condition with no rust. Also does anyone know the "True" gross wieght-I've looked everywhere and can't find...

Mass Air meter is on my car now at Livernois and according to them my application is much too small for the meter (first my penis now this,lmao). I'm taking offers or,trade or if you know how to "Properly" install a set of HPM's on a 91 Fox let me know! You can e-me at [email protected] or call me...

Brand new Mega Bite Jr's still in box! Make a reasonable offer and they're yours. Call me anytime @ 313 662-4949,Tim.

HPM MEGA BITE JR'S FOR 87 TO 93 FOX BODY BRAND NEW IN BOX! $230 obo! The lower control arms are brand new, never used, never taken out of the box! They cost $295.74 with tax. I need a 70mm throttle body for a 302, call me and we can make a deal with the throttle body if you have one or you can...

THE COMPLETE UNUSED KIT BELOW WITH FUEL REGULATOR.

FIRST $350 takes it! Brand New In Box Areomotive fuel rail kit complete.NEVER USED FIRST $350 TAKES IT! Brand new in the box never used all parts plus braided line and instructions are included (and yes the fuel regulator is new too!) Down below is "Every" thing that I have in the kit. New...

I know that there's not a great demand for racing rims when snow is on the ground, so I figure I will lower the price even more today only in an effort to get up the money I need for my exhaust. If they don't sell today, I will put back on in the spring time, so this price is for today only...